Melody at 07:52, 7 August 2024

2024-08-07T07:52:56Z

Melody: Created page with "==Product Name== Serial port Bluetooth output accelerometer gyroscope attitude angle sensor MPU6050 module ==Regarding LC-EM-1287== This module will obtain 3-axis angula..."

2024-07-30T09:55:19Z

Created page with "==Product Name== Serial port Bluetooth output accelerometer gyroscope attitude angle sensor MPU6050 module ==Regarding LC-EM-1287== This module will obtain 3-axis angula..."

New page

==Product Name==

Serial port Bluetooth output accelerometer gyroscope attitude angle sensor MPU6050 module

==Regarding LC-EM-1287==

This module will obtain 3-axis angular velocity and 3-axis acceleration by reading the MPU6050 sensor, and calculate the 3-axis attitude angle through DMP attitude calculation. Transfer hexadecimal data through a serial port with a fixed baud rate of 115200, a fixed serial return rate of 50Hz, and a Bluetooth return rate of 20Hz (depending on the network environment)

==LC-EM-1287 View==
<big>'''LC-EM-1287 Front View'''</big> 
[[Image:LC-EM-1287-02.jpg|400px|]] 
<big>'''LC-EM-1287 Side View'''</big> 
[[Image:LC-EM-1287-01.jpg|400px|]] 
<big>'''LC-EM-1287 reverse view'''</big> 
[[Image:LC-EM-1287-03.jpg|400px|]] 

==Introduction and Explanation==
Board size: 20 * 20mm/6g 
[[Image:LC-EM-1287-06.png|450px|]] 

==Functional Features==
*Small size, easy to install
*Both wired and wireless can be used
*Serial port return rate 50Hz
*Bluetooth return rate 20Hz, up to 3M

==Instructions for use==

{| class="wikitable" style="width:500px";"text-align:center"
|-
|Pin || Function Description
|-
|GND || Negative pole of power supply
|-
|NC || Short circuit GND, can upgrade CH582 firmware, generally suspended
|-
|XCL || External magnetometer, program needs to be modified by oneself; Otherwise, it will remain suspended
|-
|XDA || External magnetometer, program modification required by oneself; Otherwise, it will remain suspended
|-
|RXD || Data receiving end
|-
|TXD || Data sender
|-
|5V || Positive pole of power supply, compatible with 3.3V~5V
|} 

Use CH340 serial port to connect the board, TX RX crossover. The blue light on the board will remain on (initialization) and then start flashing (normal operation). Open the serial assistant to see the data transmission.

==Protocol analysis==
The output format is JustFloat format, where every 4 bytes represents a Float data and ends with 00 00 80 7F [https://www.vofa.plus/plugin_detail/?name=justfloat JustFloat | VOFA Plus upper computer]
[https://www.vofa.plus/ VOFA Plus upper computer | VOFA Plus upper computer] 
You can view data using the VOFA upper computer, and drag the Cube control to view attitude changes online 
A total of 10 types of data are output, all from the internal registers of MPU6050, and the attitude angle is calculated by DMP 
In order, they are: 

1.gryoX 

2.gryoY 

3.gryoZ 

4.accX 

5.accY 

6.accZ 

7.Roll 

8.Pitch 

9.Yaw 

10.temperature 

[[Image:LC-EM-1287-04.png|800px|]] 

==Bluetooth transmission==
[https://www.wch.cn/downloads/BLEAssist_ZIP.html BLEAssist. ZIP Nanjing Qinheng Microelectronics Co., Ltd. (wch. cn)] 
Install Bluetooth analysis tool on Android phone and connect the Bluetooth of MPU6050uBLE in the tool 
Find the last service and click the arrow to retrieve the data 
[[Image:LC-EM-1287-05.png|300px|]] 
[https://item.taobao.com/item.htm?ft=t&id=805837160679&skuId=5481608629714 Bluetooth serial port module BLE5.2 ECB02C BLE serial port transparent transmission secondary development - Taobao. com] 
By using this Bluetooth to serial port tool, data can be obtained directly on the computer 
Just send the command as shown in the picture. The serial tool has already set the command in the compressed file 
[[Image:LC-EM-1287-07.png|450px|]] 
If the MPU6050uBLE serial number is scanned as 1, then AT+CONNECT=1 sends 
If the MPU6050uBLE serial number is scanned as 2, then AT+CONNECT=2 will be sent 
You need to modify the sequence number of the sending instruction by yourself 
If unable to connect, power off and restart both MPU6050 and Bluetooth serial port before reconnecting

← Older revision		Revision as of 07:52, 7 August 2024
Line 112:		Line 112:
	You need to modify the sequence number of the sending instruction by yourself<br>		You need to modify the sequence number of the sending instruction by yourself<br>
	If unable to connect, power off and restart both MPU6050 and Bluetooth serial port before reconnecting<br>		If unable to connect, power off and restart both MPU6050 and Bluetooth serial port before reconnecting<br>
		+
		+
		+	==User Manual Download==
		+	For more product information, please refer to[https://pan.baidu.com/s/1NeiPrn5YdQ28FX9tzd0L-g?pwd=69k4 Baidu Cloud Drive] Extraction code: 69k4

LC-EM-1287 - Revision history

Melody at 07:52, 7 August 2024

Melody: Created page with "==Product Name== Serial port Bluetooth output accelerometer gyroscope attitude angle sensor MPU6050 module ==Regarding LC-EM-1287== This module will obtain 3-axis angula..."