Melody at 08:50, 13 August 2024

2024-08-13T08:50:06Z

Melody: Created page with "==Product Name== VL53L0X laser ranging OLED display module ToF sensor ranging STM32 main control chip 0.96-inch OLED screen display
==About== The LC VL53L0X laser rang..."

2024-08-07T10:03:37Z

Created page with "==Product Name== VL53L0X laser ranging OLED display module ToF sensor ranging STM32 main control chip 0.96-inch OLED screen display ==About== The LC VL53L0X laser rang..."

New page

==Product Name==

VL53L0X laser ranging OLED display module ToF sensor ranging STM32 main control chip 0.96-inch OLED screen display 

==About==

The LC VL53L0X laser ranging OLED display module uses STM32F103C6T6 as the main control chip and VL53L0X sensor to achieve laser ranging 
Equipped with a 0.96-inch OLED screen to display the measured distance values; The product supports Type_C port power supply mode, 
The module achieves external communication through the IIC communication interface, and has the characteristics of small size, high accuracy, long distance, and fast measurement speed 

==View==

<big>''' Front view '''</big> 

[[Image:LC-EM-1300-01.png|500px|]] 

<big>''' Side view '''</big> 

[[Image:LC-EM-1300-02.png|500px|]] 

<big>''' Reverse image '''</big> 

[[Image:LC-EM-1300-03.png|500px|]] 

==Introduction and Explanation==

'''Structural dimensions''' 

Board size: 50mm * 25mm/8g (positioning hole diameter: 3mm) 

[[Image:LC-EM-1300-10.png|500px|]] 

'''Interface Introduction''' 

1. Type_C port: power supply+USB interface 

2. Power indicator light 

3. SWD debugging interface 

4. BOOT1 interface: Insert the jump cap chip to enter the burning mode, unplug it to enter the running mode 

5. IIC interface: Insert laser ranging sensor (test range: 4~200cm) 

6. UART serial port 

7.0.96-inch OLED display screen 

8.MCU：STM32F103C6T6（LQFP-48） 

==Functional Features==

*Use mature and stable STM32F103 series 32-bit microcontrollers 

*Onboard VL53L0X laser ranging sensor, capable of measuring distances up to 2 meters (long-distance measurements require dark environments, as strong light can cause inaccurate measurements)

*Onboard 0.96-inch OLED screen, displaying measurement distance 

*It has the characteristics of small size, high accuracy, long distance, and fast measurement speed

==Instructions for use==

1. Program burning - USRT: Prepare a USB to TTL module (such as CH340) and plug it into the computer's USB port. The connection method to the module is as follows: 

{| class="wikitable" style="width:300px;"

|-

|TTL serial port module || laser ranging display module

|-

| GND || GND

|-

| TX || RX

|-

| RX || TX

|-

| 3.3V || 3.3V

|} 

Then plug in the jumper cap between the BOOT0 pin and 3.3V to burn the firmware 

2. Program burning - SWD: Prepare a Link debugger (ST Link, J-Link, etc.) and plug it into the USB port of the computer. The Link and module connection method is as follows: 

{| class="wikitable" style="width:300px;"

|-

|Link debugger || Laser ranging display module

|-

| GND || GND

|-

| SWCLK || DCK

|-

| SWDIO || DIO

|-

| 3.3V || 3.3V

|} 

Then select the firmware for burning 

3. Program debugging: After connecting the Link burner in the above way, click the "Debug" button of the compiled software, select "ST Link", and then click Settings 

[[Image:LC-EM-1300-05.png|500px|]] 

If the SW Device displays a device, it means that the debugger has successfully recognized it. Set the parameters according to the following figure and click OK 

[[Image:LC-EM-1300-06.png|500px|]] 

Then press Ctrl+F5 or click the debug button to start debugging: 

[[Image:LC-EM-1300-07.png|500px|]] 

4. Module function testing 

Prepare a measuring scale and an obstacle board, place the module at a distance of 10 centimeters and 16.5 centimeters from the obstacle board, then power on the module, and the OLED screen will display the distance size at this time 

[[Image:LC-EM-1300-08.png]] 

[[Image:LC-EM-1300-09.png]] 

The above tests show that everything is normal on the module 

==Download User Manual==

For more information on the use of this product, please refer to[https://pan.baidu.com/s/1-A2dfRmxnWLCEHl_lMwR9w?pwd=7eyb Baidu Netdisk] Extraction code: 7eyb

@@ Line 15: / Line 15: @@
 <big>''' Front view '''</big><br>
-[[Image:LC-EM-1300-01.png|500px|]]<br><br>
+[[Image:LC-EM-1300-03.png|500px|]]<br><br>
 <big>''' Side view '''</big><br>
@@ Line 23: / Line 23: @@
 <big>''' Reverse image '''</big><br>
-[[Image:LC-EM-1300-03.png|500px|]]<br><br>
+[[Image:LC-EM-1300-01.png|500px|]]<br><br>

LC-EM-1300 - Revision history

Melody at 08:50, 13 August 2024

Melody: Created page with "==Product Name== VL53L0X laser ranging OLED display module ToF sensor ranging STM32 main control chip 0.96-inch OLED screen display ==About== The LC VL53L0X laser rang..."

Melody: Created page with "==Product Name== VL53L0X laser ranging OLED display module ToF sensor ranging STM32 main control chip 0.96-inch OLED screen display
==About== The LC VL53L0X laser rang..."