Melody: /* Connection instructions */

2023-11-24T05:07:05Z

‎Connection instructions

Melody: Created page with "== '''Product name''' == 5V/7-28V power supply ESP8266 WIFI eight-way relay module ESP-12F development board secondary development
== '''Overview'''== LC ESP8266 8-way..."

2023-11-24T04:01:39Z

Created page with "== '''Product name''' == 5V/7-28V power supply ESP8266 WIFI eight-way relay module ESP-12F development board secondary development == '''Overview'''== LC ESP8266 8-way..."

New page

== '''Product name''' ==
5V/7-28V power supply ESP8266 WIFI eight-way relay module ESP-12F development board secondary development 

== '''Overview'''==
LC ESP8266 8-way relay development board is equipped with ESP-12F WiFi module and supports DC7-28V/5V power supply. Provide Arduino development environment reference code, suitable for ESP8266 secondary development learning, smart home wireless control and other occasions 
[[File:LC-WF-1-8-1.png]] 

== '''Features''' ==
*Onboard mature and stable ESP-12F WiFi module, large capacity 4M Byte Flash 

*Power supply mode supports DC7-28V/5V 

*Onboard WiFi module RST reset button 

*ESP-12F supports the use of development tools such as Eclipse/Arduino IDE, and provides reference programs in the Arduino development environment 

*On-board 8-way 5V relay, output switching signal, suitable for controlling loads whose operating voltage is within AC 250V/DC30V 

*Onboard power indicator and relay indicator 

== '''Interface Description''' ==
1. Interface Introduction 
Board size: 148*79.8mm Weight: 140g 
[[File:LC-WF-1-8-2-1.jpg]] 
Burn port: GND, RX, TX, 5V of ESP8266 are respectively connected to GND, TX, RX, 5V of the external TTL serial port module. When downloading, IO0 needs to be connected to GND. After the download is completed, disconnect the connection between IO0 and GND 
Relay output 
NC: normally closed terminal, short-circuit with COM before the relay pulls in, and hang in the air after the pull-in 
COM: public port 
NO: Normally open, suspended before the relay pulls in, and short-circuited with COM after the pull-in 
{| class="wikitable" style="width=800px;" 
|-
| Serial number || Name || Function description
|-
| 1 || ADC || A/D conversion result. Input voltage range 0~1V, value range: 0~1024
|-
| 2 || IO2 || GPIO2; UART1_TXD
|-
| 3 || TXD || UART0_TXD; GPIO1
|-
| 4 || RXD || UART0_RXD; GPIO3
|-
| 5 || GND || Power ground
|-
|6 || 5V || 5V power supply
|}

== '''Connection instructions''' ==
'''Arduino development environment setup''' 
ESP8266 supports Eclipse/Arduino IDE and other development tools. It is relatively simple to use Arduino. The following is how to build the Arduino development environment 
1. Install Arduino IDE 1.8.9 or the latest version 
2. Open the Arduino IDE, click File--Preferences in the menu bar, enter the preferences and click Add Network in the "Additional Development Board Manager URL" 
[http://arduino.esp8266.com/stable/package_esp8266com_index.json http://arduino.esp8266.com/stable/package_esp8266com_index.json] 
[[File:LC-WF-1-8-3.png]] 

3.Click Tools--Development Board--Development Board Manager in the menu bar, and then search for "ESP8266" to install Arduino's support package for ESP8266 2.5.2 or the latest version 
[[File:LC-WF-1-8-4.png]] 
'''Note:''' 
Since the download URL is from a foreign country, the access speed is relatively slow, and there may be download errors. Just try a few more times when the network is good. 

'''Program download:'''

← Older revision		Revision as of 05:07, 24 November 2023
Line 70:		Line 70:

	'''Program download:'''<br>		'''Program download:'''<br>
		+	1. Use jumper caps to connect IO0 and GND pins, prepare a TTL serial port module (for example: FT232) and plug it into the computer USB; GND, RX, TX, 3.3V are respectively connected to GND, TX, RX, 3.3V of the external TTL serial port module V<br>
		+	2. Click Tools--Development Board in the menu bar, and select the development board as ESPino (ESP-12 module)<br>
		+	3. Open the program to be downloaded, click Tools--Port in the menu bar and select the correct port number<br>
		+	4. After clicking "Upload", the program will be automatically compiled and downloaded to the development board<br>
		+	[[File:LC-WF-1-8-5.png]]<br>
		+
		+	5. Finally, disconnect the connection between IO0 and GND, power on the development board again or press the reset button to run the program<br>

LC-WF-1-8 - Revision history

Melody: /* Connection instructions */

Melody: Created page with "== '''Product name''' == 5V/7-28V power supply ESP8266 WIFI eight-way relay module ESP-12F development board secondary development == '''Overview'''== LC ESP8266 8-way..."

Melody: Created page with "== '''Product name''' == 5V/7-28V power supply ESP8266 WIFI eight-way relay module ESP-12F development board secondary development
== '''Overview'''== LC ESP8266 8-way..."